Review of Precision Determinations of the Accelerator Luminosity in LEP Experiments

The LEP collaborations ALEPH, DELPHI, L3 and OPAL were able to measure the accelerator luminosity with an experimental uncertainty smaller than 0.1%. Motivations, method, technological aspects and main difficulties of the measurements are reviewed

Use of antifuse-FPGAs in the Track-Sorter-Master of the CMS Drift Tube Chambers

The front-end system of the Silicon Drift Detectors (SDDs) of the ALICE experiment is made of two ASICs. The first chip performs the preamplification, temporary analogue storage and analogue-to-digital conversion of the detector signals. The second chip is a digital buffer that allows for a significant reduction of the connection from the front-end module to the outside world. In this paper, the results achieved on the first complete prototype of the front-end system for the SDDs of ALICE are presented

Design and Test of the Off-Detector Electronics for the CMS Barrel Muon Trigger

Drift Tubes chambers are used in the CMS barrel for tagging the passage of high Pt muons generated in a LHC event and for triggering the CMS data read out. The Sector Collector (SC) system synchronizes the track segments built by trigger modules on the chambers and deliver them to reconstruction processors (Track Finder, TF) that assemble full muon tracks. Then, the Muon Sorter (MS) has to select the best four candidates in the barrel and to filter fake muons generated by the TF system redundancy. The hardware implementations of the Sector Collector and Muon Sorter systems satisfy radiation, I/O and fast timing constraints using several FPGA technologies. The hardware was tested with custom facilities, integrated with other trigger subsystems, and operated in a beam test. A test beam on a 40 MHz bunched beam validated the local trigger electronics and off-detector prototype cards and the synchronization tools. The CMS Magnet Test and Cosmic challenge in 2006 proved stable and reliable operation of the Drift Tubes trigger and its integration with other trigger systems and with the readout system. Constraints, design, test and operation of the modules are presented

DT Sector Collector electronics design and construction

The CMS detector at LHC is equipped with Drift Tubes (DT) chambers for muon detection and triggering in the barrel region. The Sector Collector (SC) modules collect the track segments reconstructed by on-chamber trigger electronics. Data from different chambers are aligned in time and sent to the subsequent reconstruction processors via optical links. Several FPGA devices performing the processing of the data were designed in VHDL, including spy features to monitor the trigger data flow. A test jig was set up with custom hardware and software in order to fully validate final production boards. Installation and commissioning in CMS provided first experience with the synchronization and monitoring tools

Influence of the adamantyl moiety on the activity of biphenylacrylohydroxamic acid-based HDAC inhibitors

To investigate the influence of the adamantyl group on the biological properties of known HDAC inhibitors with a 4-phenylcinnamic skeleton, a series of compounds having the adamantyl moiety in the cap structure were synthesized and compared to the corresponding hydroxamic acids lacking this group. An unexpected finding was the substantial reduction of inhibitory activity toward the tested enzymes, in particular HDAC6, following the introduction of the adamantyl group. In spite of the reduced ability to function as HDAC inhibitors, the compounds containing the adamantyl moiety still retained a good efficacy as antiproliferative and proapoptotic agents. A selected compound (2c; ST3056) of this series exhibited an appreciable antitumor activity against the colon carcinoma xenograft HCT116

Event Generators for Bhabha Scattering

The results obtained by the "Event Generators for Bhabha Scattering" working group during the CERN Workshop "Physics at LEP2" (1994/1995) are presented.Comment: 70 pages, PostScript file. To appear in the Report of the Workshop on Physics at LEP2, G. Altarelli T. Sjostrand and F. Zwirner ed

Investigation on the ZBG-functionality of phenyl-4-yl-acrylohydroxamic acid derivatives as histone deacetylase inhibitors

A series of alternative Zn-binding groups were explored in the design of phenyl-4-yl-acrylohydroxamic acid derivatives as histone deacetylase (HDAC) inhibitors. Most of the synthesized compounds were less effective than the parent hydroxamic acid. However, the profile of activity shown by the analog bearing a hydroxyurea head group, makes this derivative promising for further investigation

Biphenyl-4-yl-acrylohydroxamic acids: identification of a novel indolyl-substituted HDAC inhibitor with antitumor activity

Modification of the cap group of biphenylacrylohydroxamic acid-based HDAC inhibitors led to the identification of a new derivative (3) characterized by an indolyl-substituted 4-phenylcinnamic skeleton. Molecular docking was used to predict the optimal conformation in the class I HDACs active site. Compound 3 showed HDAC inhibitory activity and antiproliferative activity against a panel of tumor cell lines, in the low \u3bcM range. The compound was further tested in vitro for acetylation of histone H4 and other non-histone proteins, and in vivo in a colon carcinoma model, showing significant proapoptotic and antitumor activities